浮床种植草坪草对富营养化水体的净化作用研究

采用浮床种植草坪草技术,研究了高羊茅Festuca arundinacea、匍匐翦股颖Agrostis stolonifera 2种草坪草对富营养化水体的净化能力.试验结果表明,2种草坪草对富营养化水体中的氮(N)、磷(P)、化学需氧量(CODcr)等具有明显的净化效果,尤其对总磷(TP)的净化能力最强,能有效改善富营养化水体的水质;2种草坪草之间,匍匐翦股颖对TP的去除效果显著高于高羊茅对TP的去除效果.研究结果显示浮床种植草坪草技术可能是一条有效的修复富营养化水域的新途径.     

褐飞虱自噬相关基因NlATG4的表达与功能

ATG4是一种半胱氨酸蛋白酶,负责ATG8蛋白羧基末端的切割,在自噬体形成过程中发挥重要作用。本研究克隆得到褐飞虱ATG4基因（NlATG4）的cDNA全长序列（GenBank登录号:MF062502.1）。RT-qPCR分析结果表明,NlATG4基因在褐飞虱的若虫和成虫时期均有表达,1～2龄若虫的表达量最高,在其他发育阶段的表达量稍低。RNAi结果显示,在dsRNA注射后的第4 d,靶标基因NlATG4的表达量显著下降（仅为dsGFP对照组的22%）,同时,NlATG4的RNA干扰导致虫体ATP含量显著降低,仅为1.0 μmol/(L·mg蛋白^-1),为对照组的25%;在注射后的第6 d,dsNlATG4处理组的褐飞虱存活率出现显著降低,其脂肪体组织变得松散,大型脂滴（直径≥5.0 μm）数量增多,类酵母共生菌周围泡状结构的界限基本消失;在注射后的第8 d,dsNlATG4处理的褐飞虱的存活率下降为36.7%,比dsGFP对照组的存活率下降53.3%。本研究表明靶向NlATG4基因的RNA干扰会破坏褐飞虱脂肪体的结构完整性和类酵母共生菌的微环境,影响脂类物质代谢和ATP含量,并导致褐飞虱存活率降低。因此,NlATG4基因在褐飞虱正常生长发育中发挥重要作用,在褐飞虱防治中具有一定的潜力。     

不同粒度猫尾草对羔羊体外发酵特性和微生物数量的影响

通过Rusitec-s体外发酵系统研究不同粒度猫尾草对羔羊体外发酵参数与微生物数量的影响,选取6种不同粒度(1.00、2.36、3.35、4.75、8.00和12.50 mm)的猫尾草作为试验饲粮的纤维来源,按照猫尾草的粒度将试验分为6个处理组,每个处理4个重复,利用Rusitec-s型人工瘤胃模拟装置进行48 h体外发酵,测定养分降解率、发酵参数及发酵液中6种微生物菌群的拷贝数。结果表明：与其他处理组相比,2.36 mm组显著提高了体外中性洗涤纤维降解率(IVNDFD)、丁酸、异丁酸、戊酸、异戊酸摩尔比和溶纤维丁酸弧菌(B. f)数量(P<0.05),且显著降低总产甲烷菌(TMe)数量(P<0.05)。总菌(TB)与氨态氮(NH3-N)浓度、乙酸摩尔比呈正相关(R²=0.84,P=0.038;R²=0.88,P=0.021);B. f数量与丙酸摩尔比呈正相关(R²=0.82,P=0.045),且与pH呈负相关(R²=-0.98,P=0.001);TMe数量与体外粗蛋白质降解率(IVCP...     

基于全基因组填充重测序关联分析鉴别影响苏山猪初生体尺与乳头数性状的遗传位点

旨在鉴别影响苏山猪初生体尺和乳头数性状的遗传位点,开发可用于辅助育种的分子标记,为苏山猪生长和繁殖性能的持续选育提供理论基础。本试验对269头苏山猪初生仔猪(出生后24 h内)的体尺和乳头数表型进行测定,并采集耳组织样品。基于全基因组重测序及基因型填充策略,利用全基因组关联分析(genome-wide association study, GWAS)和群体分化指数(fixation index,Fst)的方法挖掘与目的性状强关联位点,并对位置功能候选基因开展GO和KEGG分析,确定最有可能的主效基因。本研究共鉴别到4个候选位点,分布在13、14和X染色体上,其中与初生体尺性状显著关联的位点有2个,与乳头数性状显著关联的位点有2个。本研究筛选出1个与体长性状相关的候选基因ACTA2;1个与胸围性状相关的候选基因COL4A6;3个与乳头数性状相关的候选基因ACTA2、CRTAP和SEPTIN6,为苏山猪初生体尺性状和乳头数性状的遗传改良提供了重要的分子标记。     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.     

Influence of Indoor Thermal Environment on Thermal Comfort of Human Body

Analyses the thermal environment parameters from physiological aspect and from psychological aspect respectively. Introduces the conception of thermal comfort of human body from heat balance aspect. Presents some measures to improve indoor thermal environment and advance thermal comfort of human body. Analyses the influence of indoor thermal environment on thermal comfort of human body and some questions on the aspect of this research, also puts forward some advices.     

THE SIZE EFFECT OF THE FRACTURE ENERGY OF CONCRETE TESTED BY THREE POINT BENDING

This paper ainalyses the size effect of the fracture energy of concrete tested bythree point bending. It is shown that positive errors of test results of fracture energy increase,ornegative errors decrease with increasing of the specimen ize. The phenomenon is one of main causesresulting in the size effect of fracture energy.